Laser Penyingkiran Daripada Salutan
May 15, 2023
There are a lot of different sort of coatings, from non-sticky coatings to simple primers. One thing they have in common is that the removal of old coatings can be very difficult. That's what they're made for anyway, to not be removed. Depending on the sort of coating, aggressive cleaning techniques such as sandblasting and pyrolysis are often used to remove the layer of coating. Terutamanya anti-pakai salutan are highly resistant against these sorts of cleaning techniques, taking a lot of time to get everything off and juga: causing a lot of wear on the parts that are being cleaned.
Apa juga wujud, are anti-slip coatings used on stairs, walking surfaces, etc. After some time the wear starts to come through and replacement is necessary. These coatings often have a dark color, which makes them very suitable for laser cleaning. As long as the coating layer isn't thicker as 2 mm, you can just go it with the laser gun and after a few quick cleanings over it% 2c the layer is completely removed. You can even choose your settings so that the laser beam does have an effect on the layer on top, but not on an underlying layer if present. Couldn't be easier than that! And you also don't have to shield the entire environment for sand or dust flying around. Did we already mention that a laser cleaning machine is child's play? We'll give you a short training on laser safety and after that, you can get started yourself.
- Anti-slip salutan
- UV salutan
- EPDM salutan
- Logam salutan
- Dll.
